Dock Products Archives

Dock Leveller replacement making the back of house look like the front.

July 26th, 2019

There’s nothing better than that new dock leveller smell.

Well as very least it’d smell better than the old unit at this retail outlet.

Our Tieman dock leveller by Safetech will aid in maintaining an ergonomic, durable, safe and clean working environment.

Vermin guards prevent debris and rubbish from falling under the leveller, while also protecting feet from being crushed.

This model boasts an extended load lip to accommodate a wider range of delivery trucks.

If your loading dock environment looks like the before state, give us a call or send us an enquiry. Your workers will thank you for improving their safety.

2 Quality Installations in Tight Spaces

February 1st, 2019

Our installation team showcase how Safetech’s expertise and talent can overcome the greatest of challenges.

Both the patient transport lift at the Epworth Hospital and this Dock Hoist at Bexley North presented very challenging site conditions and accessibility restrictions.

Tight corridors and small openings made installation difficult for both projects. But through the work of our talented Installation Engineers and our on-site techs, we were able to come up with solutions to get the jobs done efficiently.

Epworth Hospital Patient Lift

For the Epworth Hospital patient lift, a crane was used to get the lift close to the opening, but then we used a custom Gorbel monorail system to slide the platform into place.

Ergonomics were considered to ensure a smooth installation without risk of injury to the team.

Bexley North Goods Hoist

Bexley North was a unique challenge. The narrow street and small doorway meant only smaller vehicles and forklifts could be used during the install, so larger cranes could not be used to remove the existing Dock Hoist or insert the new Safetech Hoist.

To overcome this, the existing table was cut down into manageable pieces for removal. For the new replacement, our skilled Engineers designed a platform that consists of 3 manageable pieces, that can be assembled in position without compromising its load capacity or structural integrity.

If you have a complex site and everyone else has said they can’t help. Give us a call, because chances are, we can!

www.safetech.com.au

Before & After Dock Hoist Replacement for Coles

September 24th, 2018

Just like Safetech, Coles take employee safety seriously.

Coles Bicton WA Old Hoist — old dock hoist in need of replacement

Coles Bicton WA renovated Dock Hoist — Coles Bitcon WA upgraded Dock Hoist

Victorian Showroom Now Open!!! – 21 Lionel Road Mt Waverley

September 5th, 2018

New showroom of Safetech in VIC — Safetech: Showroom VIC

Our Mt Waverley showroom is now open to the public for visits and product tours.

Toyota under cover loading bay fitted with Safetech Dock Levellers.

June 29th, 2018

Toyotas new Parts and Accessories Facility has been fitted with the market leading Safetech Dock Leveller and Pit Bull vehicle restraints.

This undercover area provides a smooth and efficient loading zone for the international auto maker. The simple and intuitive controls, as well as clear traffic light indicators and signage, ensure a safe and stable working environment for the facility staff.

The semi-protected loading bay demonstrates yet another example of the quality and durability of all Safetech products.

For an assessment on the suitability of our products for your application, get in contact with one of our sales staff.

Custom dock heights are no challenge for Safetech

May 28th, 2018

Gundagai Meats in southern New South Wales had an unusual problem with their current dock loading solution, which Safetech were more than capable of solving. Standard docks are usually built to work with a standard truck type, providing a narrow range of dock loading heights. But Gundagai Meats have a wide range of trucks coming in to load produce, both large and small.

The added complication of needing a climate controlled environment to protect the produce, as well as restraining vehicles to prevent truck creep was also important.

So, careful planning was required.

Enter the 2x custom step down 714h Dock Levellers, fitted with the Pit Bull vehicle restraint and the Safetech Inflatable Dock Shelters.

The Dock Levellers were made to service truck beds from 1000mm to 1600mm, which is well outside our standard Dock Leveller range. Sporting the optional galvanised finish, they were then mounted on our free-standing dock frame.

Safetech Project NSW Dock Heights — Gundegai Meats dock heights project

Controlling the Docks is intuitive, using the custom IDD panels from outside the docking bay.

Visit the rest of the website for more information about all our products. Or get in contact with one of our reps, to see if we can help provide you with a modern docking solution.

The new Safetech Tieman Dock Leveller brochure now available.

March 23rd, 2018

Your overview of the industry leading Safetech Tieman Dock Leveller is now available in print form.

The new and improved Dock leveller brochure provides you with all the information you need to know what our Dock Levellers are all about.

Check out images of some of its best features, or use it to get an understanding of how they work, including weight distribution, safety features and operation.

For a copy of the brochure, or for more information about our Dock Products and other Safetech lifting solutions, check out the rest of our website: www.safetech.com.au

You can also speak to one of our product specialists. Details can be found by filling out our Dock Products Enquiry form, or on our contact page.

Safetech Docks at Reckitt Benckiser’s new Oakdale Home.

February 23rd, 2018

Reckitt Benckiser have moved into their new distribution centre at Horsley Park in Oakdale NSW.

An integral part of these new facilities are the 10 new Dock Levellers, S3200 Snap Back Shelters, Aero Tech Fans with Swing Arm Lights, as well as some In Ground Wheel Chocks and SL80 PitBulls with Master Control Panels that have recently been installed in partnership with the highly regarded building company Qanstruct.

These Safetech product solutions provide Reckitt Benckiser with the highest quality, climate controlled loading dock expected of the British multinational consumer goods company.

The centre will facilitate the distribution of Reckitt Benckiser’s products Nationwide, staffed by an estimated 150 employees. The 35,482m2 facility will include a 3,580m2 temperature controlled store, a 7,360m2 dangerous goods store, 800m2 work and re-work areas and 800m2 of office spaces.

For more information about our Dock Products, or other Safetech lifting solutions, check out our products page:

or speak to one of our product specialists. Details can be found on our contact page

Category Archives: Dock Products