Safetech scissor lift tables are ideal for use as car hoists to transport a car from ground level to a basement of first floor garage. They allow the car to be driven onto the platform and then moved to the desired level safely and efficiently.

Safetech can work with builders and architects to customise the design of the lift table to suit individual requirements. We can also assist with installation.

 

OPTIONS

• Variable platform sizes.
• Platform options including chequerplate, special paints and stainless steel skins.
• Safety skirts.
• Lifting lugs.

APPLICATIONS

• Commercial buildings
• Car dealer showrooms
• Private residence
• Car parks
• Offices

To help ensure that we provide you with the best possible solution for your problem please consider the following areas when analyzing your requirement

A. Define Function

Consider the following when describing function
 

• The lift table is to be used to transfer x product
• This lift table is used to transfer goods from ground level, down to the below ground plant or to conveyor level, or vehicle level etc.
• Duty cycle is 5 lifts per hour 8 hrs per day etc
• Personnel lift required or is the lift table is to carry freight only, if so personnel shall not ride on the hoist.
• The lift table will comply with standard AS 1418 part 8 – 2008 etc

B. Access and building detail/surrounds

• The lift table structure will be freestanding/ will be in a shaft/will be adjacent to etc
• Details of the concrete/ forces imposed onto the concrete for large lift table
• When fully raised, the lift table platform will be flush with adjacent ground level. No part of the lift table platform or structure will project above ground level.
• Access for installation and maintenance to be considered
• Environment the lift table will be operating in e.g dry, wet, washdown, corrosive, dusty

C. Dimensional Information

• Capacity:                                kg
• Vertical travel:                        mm
• Platform:                                 mm x  mm
• Elevation time:                      sec (approx)
• Pit Depth/Collapsed height mm

D. Platform

• Finish – chequerplate/flat etc
• Personnel carried
• Dimensions as above
• Platform attachment to ground e.g sitting on ground/in pit/ tie down points,
• Gates

E. Power Pack

• Power available particularly for large tables
• Location - remote/onboard
• The lift table incorporates a remote hydraulic power unit. The power unit (approx 1000mm x 800mm x 1500mm high) must be located at the lower level, adjacent to the base of the hoist.

e.g We require a 415V 3 phase + neutral 20 (perhaps 30) Amp switched outlet (Clipsal 56C520 or similar) adjacent to the hydraulic power unit.

F. Controls

• Floor, in hand pendant, remote panel
• 2 button
• On Board for personnel
• Is call button required

G. Finish
 

•  Standard Industrial enamel
•  Sandblast to class 2 ½
•  Apply one coat zinc rich primer to 75um DFT
•  Apply one coat high build epoxy to 200um DFT.

H. Safety

• Descent protection
• Standards
• Fencing
• Manuals

I. Exclusions
 

MODEL RANGE

Scissor Lift Model Range - Single