Double and Triple Scissor Lifts Tables and Scissor Hoists provide users with greater scissor lift travel for a smaller footprint.

These lift tables can be installed in shafts or used as freestanding lift tables for dock or access applications or any other use where the stroke/footprint ratio of a single lift table is not acceptable. Personnel access is possible as long as the lift table complies with Australian design and safety regulations.

They still include an extensive range of lift table capacities, features and options to provide the factory and warehouse with precise lifting and work positioning. 
 

 

                  

 

LIFT TABLE OPTIONS

Variable Deck sizes
Custom platform fencing and gates.
Special paints


APPLICATIONS

Personnel work platforms
Goods Hoists
Freight lifts between floor levels.
Mezzanine lifts,
Automated palletising systems
Positioning test apparatus or tools. 


Contact Safetech to discuss your custom application.

TECHNICAL SPECIFICATION FOR LIFT TABLES

To help ensure that we provide you with the best possible solution for your problem please consider the following areas when analyzing your requirement

A. Define Function

Consider the following when describing function
 

• The lift table is to be used to transfer x product
• This lift table is used to transfer goods from ground level, down to the below ground plant or to conveyor level, or vehicle level etc.
• Duty cycle is 5 lifts per hour 8 hrs per day etc
• Personnel lift required or is the lift table is to carry freight only, if so personnel shall not ride on the hoist.
• The lift table will comply with standard AS 1418 part 8 – 2008 etc

B. Access and building detail/surrounds

• The lift table structure will be freestanding/ will be in a shaft/will be adjacent to etc
• Details of the concrete/ forces imposed onto the concrete for large lift table
• When fully raised, the lift table platform will be flush with adjacent ground level. No part of the lift table platform or structure will project above ground level.
• Access for installation and maintenance to be considered
• Environment the lift table will be operating in e.g dry, wet, washdown, corrosive, dusty

C. Dimensional Information

• Capacity:                                kg
• Vertical travel:                        mm
• Platform:                                 mm x  mm
• Elevation time:                      sec (approx)
• Pit Depth/Collapsed height mm

D. Platform

• Finish – chequerplate/flat etc
• Personnel carried
• Dimensions as above
• Platform attachment to ground e.g sitting on ground/in pit/ tie down points,
• Gates

E. Power Pack

• Power available particularly for large tables
• Location - remote/onboard
• The lift table incorporates a remote hydraulic power unit. The power unit (approx 1000mm x 800mm x 1500mm high) must be located at the lower level, adjacent to the base of the hoist.

e.g We require a 415V 3 phase + neutral 20 (perhaps 30) Amp switched outlet (Clipsal 56C520 or similar) adjacent to the hydraulic power unit.

F. Controls

• Floor, in hand pendant, remote panel
• 2 button
• On Board for personnel
• Is call button required

G. Finish
 

•  Standard Industrial enamel
•  Sandblast to class 2 ½
•  Apply one coat zinc rich primer to 75um DFT
•  Apply one coat high build epoxy to 200um DFT.

H. Safety

• Descent protection
• Standards
• Fencing
• Manuals

I. Exclusions
 

MODEL RANGE

Scissor Lift Model Range - Doubles